Description
The dayliff shower booster pump DDP50A is a robust and efficient automatic pressure controlled peripheral impeller booster pump suitable for domestic and small scale applications where on-demand water supply is required. The pump is self priming and is equipped with a diaphragm type pressure vessel and a pressure switch to provide fully automatic operation. Pump construction is a cast iron body with brass insert on the wearing surface and brass impeller. Available at Electric Instant Showers
MOTOR
The pump is close-coupled to a single-phase motor designed for continuous operation and is provided with a thermal cutout to protect against electrical overload. It can be connected directly to the mains power supply through a 5A fuse or MCB.
| Motor | |
| Enclosure Class | IP44 |
| Voltage | 1 X 240V |
| Insulation Class | B |
| Speed | 2900rpm |
| Operating Conditions | |
| Pumped Liquid | Thin, clean, chemically non aggressive liquids without abrasive particles or fibres |
| Maximum Fluid Temperature | +60C |
| Maximum Ambient Temperature | +40C |
| Maximum Suction Lift | 7m (at sea level) |
| Cut in pressure | 1.2 Bar |
| Cut out Pressure | 1.8 Bar |
| Pressure Vessel Pre-charge Pressure | 0.95 Bar |
| Pump Information | |
| Model | DDP50A |
| Power (HP) | 0.32 |
| Power (kW) | 0.25 |
| Current (A) | 2 |
| Dimension(mm) – DN1 | 25 |
| Dimension(mm) – DN2 | 25 |
| Dimension(mm) A | 265 |
| Dimension(mm) B | 200 |
| Dimension(mm) C | 72 |
| Dimension(mm) H | 256 |
| Weight (kg) | 9 |
